Home > How To > How To Install A Second Hard Drive Windows 7

How To Install A Second Hard Drive Windows 7

Contents

All submitted content is subject to our Terms of Use. I HAVE ALWAYS USED THE SLAVE HARD DRIVE AS THE BACKUP DRIVE THUS THERE IS NO WEAR AND TEAR PLACED ONTO THE OLDER DRIVE ON A DAY TO DAY BASIS. Track this discussion and email me when there are updates If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and Flag as duplicate Thanks! http://htmltemplatesfree.net/how-to/how-to-install-a-second-sata-hard-drive.html

If you have a Dell, you only need to push down on the release latch(es) on the back or sides. Once reported, our moderators will be notified and the post will be reviewed. You could then have a directory made called "Old HD" and copy the whole thing into it. I will have a CD-R on my new computer also.

How To Install A Second Hard Drive Windows 7

You’ve completed the hardware aspect, but not the software aspect! Reply Terrion September 10, 2016 at 12:36 pm Hello, I have a question. Is it the same as your new computer?

Go to the "Standard CMOS Settings Or IDE Config." In this menu, you will find four settings labeled as follows: PRIMARY MASTER:, AUTO/PRIMARY SLAVE:, SECONDARY MASTER:, SECONDARY SLAVE:. If it doesn't work, your drive is dead, or not powered correctly. I prefer to have the old hard drive as a slave because 1. How To Connect Two Hard Disk In One Pc Right-click on it > new simple volume > next *** don't change "SIMPLE VOLUME SIZE IN MB" if you don't want to create additional partitions *** The same result can be

It'll all be over in, well, I haven't flgured out how many years yet; rather I'll leave that calcuation to an Expert in such things. How To Install A Second Hard Drive Windows 10 Do you know how to change the settings to make the old drive a slave (all single drives are 'masters'; second drives are 'slaves'). If it is over 2 or 3 years old, I would be cautious.2. On the technical side, you are looking for a “3.5 inch SATA hard drive”, and make sure you pick up another “SATA cable” while you are there – the store clerk

by merryann / September 2, 2004 11:23 PM PDT In reply to: Install old hard drive as slave drive? Second Hard Drive Not Showing Properly ground yourself while performing this procedure, (or, ideally, any kind of electronic work.) If that is not possible just don't attempt it after walking barefoot on a carpet or other Get the answer andywork78Nov 23, 2011, 11:38 PM If software has a option for custom install then you can install to other HDD.But must face with this.The main software will install Any later program installations (apart from system-related ones) will be done to the new disk – have a dedicated place/path for that.

How To Install A Second Hard Drive Windows 10

The connector end broke in my HD cable when I was pulling it out.

Click "Start," type "diskmgmt.msc" (without quotes) in the Search box and press "Enter." Disk Management will launch and the Initialize Disk Wizard should start automatically. 10. How To Install A Second Hard Drive Windows 7 I saw this on PC Advisor and thought you should see it too. How To Install A Second Sata Hard Drive FORMAT THIS VOLUME WITH THE FOLLOWING SETTINGS NTFS DEFAULT (name it with whatever you want) PERFORM A QUICK FORMAT 7.

Thank you very much for your instructions. check over here The life span of a hard drive is limited and you may want to check out the odds you are trying to beat if you reuse the drive. Read the instructions in the package to install these. First time setting up a slave drive, need simple instructions First time setting up a slave drive, need simple instructions Laptop Hard Drives,how to set master and slave Setting Up Slave How To Slave A Sata Hard Drive

I’ll be covering the software and configuration side of adding a second drive in my next article – so stay tuned for that. Do not make any other changes in the CMOS settings. I was planning to include IDE drives in the article originally too, but then it just got far too long, and I think honestly I'm correct in standing by my statement his comment is here Powered by Mediawiki.

Inicia sesión para añadir este vídeo a una lista de reproducción. How To Configure A Second Hard Drive Read more. If you do find yourself with an IDE drive, you’re not completely out of luck but I’m afraid it’s out of the scope of this guide.

Note that you may need to leave the old one in temporarily to transfer your data onto the new one.

by ramusson / August 26, 2004 2:09 PM PDT In reply to: Install old hard drive as slave drive? In the case both the HDDs are IDE, you need to specify and let know the BIOS which drive from which to boot – i.e. How easy it is depends on method and money. How To Slave A Hard Drive If it won't go in, make sure that the safety bump is aligned with the hole.(fig. 6) 12 Connect a Molex power cable, (a smaller connector with red, yellow, and black

Yes No Cookies make wikiHow better. Is it possible and how do i do it if so? Abraham Levit 2.065.621 visualizaciones 7:46 Cargando más sugerencias... weblink I HAVE DONE THIS FOR YEARS WITH NO PROBLEM!

It's difficult to cover everyone's needs every time. How do I set master / slave for SATA and IDE drives? I think PC anywhere does this at least it did back in 95/96 and came with a cable. This may sound trivial, but beware, even as a "Slave" it could infect the new system.

With SATA, all you need is a free SATA port on the motherboard, a spare bay in which to mount your second hard drive, and a SATA cable to connect the Reply James Bruce March 21, 2015 at 7:35 pm Assuming the drive is still intact, the best thing is to just buy a USB enclosure for it - you'll need to What are the steps I need to be following in order to install an additional HDD in a PC? simeonhendrix 260.020 visualizaciones 5:10 How to install SATA hard drive into a computer - Duración: 6:52.

I'm running XP Home(SP 3) on the boot drive. 5 answers Last reply Nov 30, 2011 Best Answer Nov 24, 2011 More about install programs slave drive hang-the-9Nov 23, 2011, 10:43 As I did mention in one of my posts, I have foregone the idea of installing the old drive on my new computer for a number of reasons, including the fact Acción en curso... Also, having software running on a different drive (other than C:\) results in its own set of problems when configuring where things go. 6.

However, I was unaware that the "Old Drive" was infected with a virus. Booting a PC with 2 hard disks, each with it's own OS and logical DOS partitions, without one configured properly as a slave, can irrepairably damage a PC, so I'm told... You need to take some things into consideration:1. Make sure that the type (SATA or IDE (PATA)) matches.

Not a dog. 2. Inicia sesión para añadir este vídeo a una lista de reproducción.