Home > Hard Drive > How To Connect Ide Hard Drive To Sata Motherboard

How To Connect Ide Hard Drive To Sata Motherboard

Contents

In Windows 9x/ME, it will appear, but you will need to right-click on the new drive and choose "Format" from the menu. Thanks. If this article is too hard for you to understand, then perhaps you should look for another article somewhere else or wizen yourself up a little and come back for more.It's also i've updated the bios drivers and according to other forums should have stopped the Sata troubles.>ive tried setting the IDE to primary slave and cable select but none have changed http://htmltemplatesfree.net/hard-drive/how-to-connect-sata-hard-drive-to-motherboard.html

Some move a drive like that and hope the software keeps running (from the old drive). My SATA conked out, and I wanted to get up and running right away, w/o buying an expensive SATA at a brick&mortar store nor wait 5 days for a it to Same goes for SATA controllers.I think some SATA drives have legacy IDE plugs on them, but I'd only use the SATA plug with the small serial cable. neither of this partitions let me install windows as they say it cant read the SATA drive.> the third thing that i found really weird was that when i reinstalled windows http://www.tomshardware.com/answers/id-1672957/booting-seconday-slave.html

How To Connect Ide Hard Drive To Sata Motherboard

Thanks for the instructions! I have an 80gb IDE and want to add more memory. Reply vince on March 26, 2013 at 2:21 pm for one if the NEWB reads this it will perk his interest. What I did state was that it was intended more for individuals who were already computer savy.

Reply Www.diolt.com February 28, 2011 at 10:27 am Hello thanks for the nice information you shared Reply FreeReferrals February 27, 2011 at 9:40 pm Thanks this was very helpful and I Jesermay, Dec 30, 2008 #3 Frank4d Trusted Advisor Joined: Sep 10, 2006 Messages: 9,126 My son has a laptop running Windows XP, Windows 98 and Linux. I have a sata HD running as my main drive and another IDE HD, formerly my main one, that I use for music files and backup storage. How To Make Ide Boot Instead Of Sata If you are not providing enough power the the HDD in the caddy, that would explain why it can't work, and MAYBE why the rest of the laptop does not seem

If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Sata And Ide Hard Drives Together Verify the drive is enabled in system BIOS. Reply Nick on August 22, 2009 at 4:15 am awesome. Reply Mark barbee on August 31, 2009 at 7:25 pm Here's one for ya.

i have a question tho,, i want to add a second drive simply for photo work. Ide Hard Drive Jumper Settings You found this article on a website specialising in PC mechanics, aimed at it's own users, who are already computer literate. However it is not appearing in ‘My Computer', even though I'm using Windows ME? ALL drives, including the optical drives are listed.

Sata And Ide Hard Drives Together

The Drive is found under the device manager under mass storage but not in disk manager. http://en.community.dell.com/support-forums/disk-drives/f/3534/t/19361896 example large four prong plug in the computer vs. How To Connect Ide Hard Drive To Sata Motherboard Once reported, our moderators will be notified and the post will be reviewed. Ide And Sata Drives In Same Computer Right click on it.

I tried to re-set boot priority and drive priority, but I get the same thing. his comment is here These two terms are relevant ONLY to the two devices sharing one IDE port; they have NO meaning for the machine as a whole. Change any necessary jumpers (see "Setting Jumpers" above) so that both drives as well as a CD drive are recognized. Four if you never touch anything in your system. Motherboard With Ide And Sata Ports

How do you format a HD that you cant see then? Reply Grail on January 20, 2009 at 12:54 pm this guide is … what can I say? This is where almost all headaches and problems came in. this contact form Reply Jakey on October 2, 2007 at 11:08 am I have no experience whatsoever and didnt even know the difference bewteen the cables but you have saved me 50.00 possibly more

Join our site today to ask your question. What Are The Two Goals When Implementing A Raid Solution is it possible to boot from a IDE Slave hdd? I'll be having a SATA later on for my slave drive.

The Master drive goes on the black connector at the end of the cable, the slave drive connects to the gray connector in the middle and the host adapter connects to

Thanks Reply Tom on December 20, 2008 at 10:19 pm Without getting involved in a conversation about whether or not myself or anyone else can understand the lingo here…I'm simply attempting All Rights ReservedAd Choices The information on Computing.Net is the opinions of its users. If that does not work, there may be something wrong with the drive. How Many Hard Drives Can Be Connected To A Single Ide Cable Re-using XP boot drive as a slave in a Win 7 SSD install Issue with me WD Caviar when i try and boot it as a slave Boot dos from a

it can't detect a primary slave and it says the primary Can't boot with IDE primary master and primary slave hard drives attac Primary SATA won't boot when IDE Slave laptop Click here to join today! What they need is to study "Computers for Dummies" first -then- read this article. navigate here So my question to the world is can I put the harddrive into another computor to restore lost files and possibally benifit from 1 computor - 2 hard drives.

Off-Topic Tags How-tos Drivers Ask a Question Computing.NetForumsGeneral HardwareHard Drives Solved Dual booting 2 different ide drives Tags:Microsoft Office 2007 professional (aca...IDEDriveoptical driveHDD danieloconnor June 20, 2011 at 10:12:15 Specs: XP I need the old drive in order to run the image software, as I don't have a boot CD or the windows disks on hand. Not the answer you're looking for? Reply David D on June 3, 2008 at 12:56 pm I'm planning a hard drive replacement.

I assume that its flat cable will fit into the regular IDE slot of the mobo, but won't be able to share the cable of the primary SATA drive. I upgraded the IDE with a SATA adapter(should I remove the jumper then?). The ribbon cable is usually quite easy to remove. You should be able to remove a jumper with your finger nails, if not then use a pair of very small needle nose pliers and don’t bend the pins.

But having read this article in advance, I felt confident I could have overcome installation issues. Once you’ve got it in, don’t forget to format the drive How To Format A Large Hard Drive With Either FAT Or FAT32 How To Format A Large Hard Drive With The link below has pictures of the various IDE cable types, including round ones.http://www.google.com/search?q=pict... But as long as you will use the external HDD only for data storage and retrieval, that should not be an issue.5.

You can guess the result.-> Also, XP will mark the drive as non-bootable and others weep as they have to repair it when they stick it back in the old machine.Bob I'm running 4 IDE/ATAPI devices (160GB HD, 80GB HD, CD-RW Drive, and a DVD/CD-RW Drive) on my IDE controllers. Especially from WinXP 32bit to Vista 64bit. I did think of making the hdd the master on the secondary channel but I would have bet my next weeks wages the wires would not reach that way round.....

They sell all kinds od power cable extentions and adapters. Joshcore, if you are blindly defending your precious website PC Mech, then please, at least have a decent reason to do so. Go to Boot Priority setting, and set as you wish - say, optical unit followed by HDD. The problem of reinstalling Windows on a SATA boot device still happens with XP, but almost the first message from Windows asks you to "press F6 to install a Raid controller".